Below are the available bulk discount rates for each individual item when you purchase a certain amount
510 To 510 Adapter | Extender
510 modders connector with nut
Finally a 510 connector that does not need to be pressed in. This is a 510 connector with threaded insert and a threaded nut, never press a connector into a plastic box mod or washer again. No need to worry about connectors coming loose.
Also can be used on any mod as a 510 to 510 extender/adapter (small nut must be removed for this application). Use this on your Ego/Riva style mods to extend a 306 atomizer and make use of your atomizer cone again.
Perfect adapter to properly use your Empire drip shields with a 510 or 306 (306 requires XL306 drip tip)
Includes 1 Connector with removable nut
Posted by Unknown on 12th Apr 2014
What more can you say? 510 threaded connector. Works great for box mods. You can even use it to help with 510 threads that are cross-threaded. This thing is bulky enough to stay in place.
Posted by DanielS on 15th Jan 2014
Not having a tab to solder a negative terminal to makes connecting it difficult, as does the small area between the nut and the connector so only it can only be mounted on pretty thin material. a longer threaded area and some place to solder to would make this alot better / easier to use imho.
Posted by Unknown on 28th Nov 2013
better than the chinese stuff
Posted by mark sainz on 30th Sep 2013
well i have 3 z atty pros, but ony 2 provaris, plus i wanted to use the ZAP's with other devices, bought some cheapo chinese made adaptors, fot very loose worked but shabby, i saw and bought these you can feel the workmanship behind avid vapors products. machined like they knew what they were doing, will always, i repeat always look to avid vapor for these types of fittings.
Posted by Unknown on 27th Sep 2013
No words can really describe how disappointed I am in general over the availability and quality of just about every modder's connector. They either have to be epoxied or the insulators are crap.
In this case, The avid connector can slip into any hole you make in your potential device and hold securely with the tightening of a nut.
While that solves 90% of my problems with most modding connectors, the insulator still causes the main drawback. It's squishy, it's not durable, it's crap and being a manufacturer myself, that causes a lot of returns for me on destroyed connectors, which then have to be epoxied internally to keep the pin fixed so customers can't overtighten and ruin their sockets.
While I wait for a solid solution or the perfect connector, these will "do"... but I know our community, even Cisco have the capability for something better.
Posted by Chris H on 26th Sep 2013
The adapter is great. I got the sealed version. It is completely sealed so no juice will seep through and into your PV's 510 connector. Makes solid contact and does not cause any shorts or air flow issues. It also has a nut on the bottom of the 510 male connector to adjust tightness to the 510 female connection.
Works great on 510 atomizers and especially the cisco spec atties.
Posted by John on 12th Sep 2013
Exactly what I needed and works great for my application. I would also agree with Jeff's review stating a hex nut would be icing on the cake for this. Otherwise a solid product, from a solid company.
Posted by Jeff on 10th Jun 2013
Works exactly as it should. The only improvement I could recommend would be to offer a hex nut instead of the flat sided ring nut.
Posted by KY_Rob on 25th May 2013
This adaptor connector is a much better quality of others I've used. It fits and works perfectly. Nice job AV!
Posted by AL on 21st Mar 2013
This is a better connector than the other three i have tried. Threads are nice and the option for the closed center post is very nice.
Posted by Skyway on 7th Dec 2012
This is perfect for using in custom DIY box mods. No more having to worry about the hole clearance and press fitting the connector.
Posted by Unknown on 11th Sep 2012
the nut is definetely on there just small and unnoticeable...feel dumb now but cant wait to use it
Posted by Gary on 9th Sep 2012
needed some extra clearance so that my 510 connector wouldn't get messed up. This fit the bill perfectly and is well constructed.
Posted by Pete on 30th Jul 2012
I swear by these things. A must have for the notoriously sinister Provari center post and dripping atomizer's.
Posted by Unknown on 3rd Jul 2012
Well built connectors.
Posted by Pete on 2nd Jul 2012
I ordered two of these one for my proveri and the other for my Silver bullet. Both with the HH 357. Not only did these connectors along with the drip shields help my mods look cooler. But thay work like work like a charm, fit perfectly,and are up to my high standards. Thanks again Avid Vaper.
Posted by Herb on 17th May 2012
no more leaking onto my silver bullet and hand.
Posted by AJay on 21st May 2011
When I got my drip shield at VapeFest, I went ahead and got the 510-901 / 901-510 adapters they were selling too. I wasn't completely happy with the excessive length that they created so I started looking around and found these. This makes the 510 pretty damn close to the length of a 901 and the drip shield fits perfectly now. I highly recommend these to anyone using a DS on a 510.
Choose a currency below to display product prices in the selected currency.