A7 Rebuildable Atomizer
The A7 Rebuildable Atomizer. Made all Stainless steel tube and stainless steel internals with nylon insulators, this atomizer can be completely disassembled and put back together. The internals can be removed from the tube to ease the installation of the coil and wick. The center post is adjustable and can compensate for devices with slightly recessed connectors. This is only for the most experienced user as it requires a fair bit of technical aptitude and patience in re-winding the coil around the wick. These will not work as a bottom feeder. This has a solid center post, air intake is two small holes above the 510 threads, similar to a sealed post 510 atomizer. This will not work as a bottom feeder.
Package Includes the following:
1 Rebuildable Atomizer Unit (510 Native connection) that is ready to vape with a 3.0ohm pre-assembled wick and coil. Add an addtional 5 pack of coil and wick can be added from product page above for an addtional cost, for additional coils and wicks, please click here.
Due to the nature of this product there is no warranty, this product is for experienced users and requires a certain amount of skill and knwoledge to use properly
Posted by Unknown on 22nd Aug 2013
Over all this is a decent off the shelf RDA. After watching several rebuild videos for various RDAs on YouTube, I noticed a large amount of tips about increasing airflow to improve vapor production. I think the air holes on this should've been larger. That being said, the threads between the cap and the base are done well enough such that if you did drill the cap for improve airflow, you could be sure that the air holes would line up the same way every time.
Also, there is not a lot of space to work with in this atomizer. It is hard to get more than 5 or 6 wraps with 28 gauge kanthal.
This being a stainless steel body, it is not at all easy to drill holes for. I failed at it for about an hour before giving up. I tried 1/16" drill bits, and a few dremel tips including even a thin diamond coated drill tip. It'd be nice if Avid Vaper offered to drill holes to spec before shipping (I'd even pay extra for it and would understand delayed order processing).
This RDA can hold a good amount of liquid and after two weeks with it I've not had any leakage issues.
The adjustable center pin is a little loose and tends to "screw in" when the atomizer is unscrewed from the battery, which means you have to be careful to adjust the pin every time before you screw it into your battery. It'd be nice if this was a little stiffer.
Posted by Eduardo on 28th Feb 2013
He is fantastic, very well behaved with the coil of 2.5 which bought together. It fell right in the EVIC, steam production and flavor were great. Very easy to repair, is the first that I buy these and loved. Just works.
Posted by Louis on 22nd Nov 2012
The quality seems to be good except for the coil &n drip tip.
Coil is too high for my REo Grand & drip tip doesn't tightly.
I am waiting for wire & wick to fix this problem I hope.
Also it has a very loose draw whihc is not a deal breaker with me, just takes some getting used to.
Stock coil gave good vapor but no flavor.
Posted by Gotsteam on 3rd Nov 2012
Holy cow! Is this what I've been missing in a vape?? I can't believe the massive flavor! This thing is crazy! I love it. Definetly worth it. Get the pre coiled wicks too. wow.
Posted by Cedarcroft on 29th Oct 2012
Good inexpensive article, have Bulli A2 and this works better. Good for those that want to try a rebuildable. Good vaper production and flavor.
Posted by Dwight L on 10th Oct 2012
Great atomizer compatible for use with bottom-feed mods. Great for people interested in, or who currently use rebuildable atomizers(RBA's). This is my favorite way to vape with an easy-to-get RBA that works great, especially with feeders.
Posted by lowerfactor on 28th Sep 2012
Great rebuildable atomizer for bottom feed mods.
Posted by Stan M on 21st Sep 2012
Setup: 1000mah eGo-C Twist VV w/ Ming DT
Just received this yesterday and it's been working great! The draw is a little bit more airy than I prefer but it's acceptable. Produces a lot of vapor right away and holds a lot of juice. The raised tube at the bottom does a good job of holding juice in so it doesn't just drain out the bottom like a sink.
Haven't swapped out the wick yet but it looks fairly easy - may need some tweezers as the wires and posts are pretty small. A small phillips screwdriver will also be needed.
It pairs well with the eGo Slim Tank Cones (http://www.avidvaper.com/ego-slim-tank-cones/) for that nice clean look.
Choose a currency below to display product prices in the selected currency.