Cisco Spec HR510 3.5 ohm Atomizer + Drip Tip Special

You will receive 2 High Resistance  3.5 ohm Cisco Spec HR510 atomizers  in your choice of Stainless or Black and 1 510 Drip Tip in any of our contoured translucent colors, black Delrin or white Delrin, and anodized aluminum.

Choose your drip tip from the list below and enter the appropiate number in the Drip Tip # field above

These atomizers are custom designed with a high quality 3.5 ohm coil and can be used on any standard ecig battery or mod, including dual battery and Varible volt/watt mods.

These atomizers are for dripping / auto fed mods and require a drip tip or juice feed system, cartridges can be used at standard voltages. There is no primer fluid used in manufacturing of these atomizers, please drip 4-5 drops of e-liquid on any new HR510, give the liquid 30 seconds or so to soak in and wet the coil, drip 1-3 more drops when your ready to vape. Do not run the atomizers dry as this puts excess stress on the coil and could damage the coil rendering the atomizer useless.

 There is a learning curve inherent with HR atomizers running @ above standard voltage of 3.7v and you need to understand how to use them properly and not damage them. I don't recommend these atomizers for users who are new to vaping unless they understand the proper use. There is no warranty on these atomizers, every atomizer is metered out and is guaranteed to not be DOA.

These 510 3.5 ohm atomizers will work on any standard E-Cig battery with a 510 connector.

There is a 24HR DOA warranty only

PLEASE CAREFULLY CHOICE YOUR DRIP TIP NUMBER FROM THE LIST BELOW AND ENTER THIS NUMBER IN THE ABOVE DRIP TIP # BOX, ANY ERROS WILL DELAY SHIPPING.