The T3S and MT3S is the newest in the line of bottom coil clearomizers from kanger.
The MT3S/T3S's have a 2.4ml liquid capacity, and replaceable bottom coil atomizer heads.
The bottom coil atomizer head that is installed is 1.8ohm.
The Bottom Coil design allows for superior wicking and maximizes flavor.
Compatible with eGo threaded batteries and most other eGo threaded electronic cigarettes. Please be awere the MT/T3S threads on to the eGo cone threads not the 510 connector threads, some devices wit hrecessed ego connectors do not have the cone threads To use this on 510 native threaded device will require a 510 to eGo adapter available here.
The metal tank sleeve on the MT3S is windowed to view the interanl polycarbonate tank liquid level.
The mouthpiece like the T3 is permanently attached.
The replaceable coil screws into the bottom cap of the MT/T3S clearomizer. Simply unscrew the bottom cap and replace with a new head without the need to empty your remaining liquid from the tank.
To fill the MT/T3S, turn the clearomizer upside down, and remove the bottom thread assembly. Tilt the MT/T3S at a slight angle, fill with 2.4ml of your favorite e-liquid. Do not allow liquid to flow in to the center air hole tube.
Replace the bottom thread assembly, wait 2-3 minutes and it is now ready to be used.
Replacement Bottom coils (1.5ohm, 1.8ohm, 2.2ohm, and 2.5ohm) are available seperately!
Note: The Replacement coils are not compatable with Pro Tanks or eVods.
Includes one T3S or MT3S clearomizer with tip and 1.8ohm coil (+/- .2ohm)
Colored Polycarbonate T3S: Clear, Smoke, Blue, Red, Purple, Green, Yellow
Windowed Metal Sleeve MT3S: Black, Stainless, Red, Purple, Blue, Yellow, Green, Pink
Be sure to check and tighten the Bottom coil, after filling with liquid.
This will ensure that no leaking will occur.