MNKE IMR 18650 1500mAh Li-MN 3.7v rechargeable lithium battery.
Safe chemistry Li-MN 3.7V rechargeable battery does not require protection circuit. These cells can handle high amperage and is safe to use in series / multi-cell applications. Can be charged with any Li-Ion battery charger with 4.2V output. Price is per single cell (1x)
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries with a protection circuit is potentially hazardous.
Rated Capacity 1500 mAh
Maximum Continuous Discharging Current 20 A
Maximum pulse Discharging Current 60 A
Maximum Continuous Charging Current 6.5 A
Maximum Rated Discharging Current 30 A
Nominal Voltage 3.8 V
Maximum Charge Voltage 4.2±0.05 V
Temperature Range/Discharge -20~60degree
Temperature Range/Charge 0~45degree
Temperature Range/Storage -20~35 degree
Internal Resistance at Shipping 23±1 mΩ
Weight 40.5±1 g
Posted by John on 3rd Mar 2014
These are my favorite batteries by far. Great for LR coils on a mechmod and probably one of the safest batteries for it. Not the cheapest prices I've seen but for prompt shipping, availability and a great customer service I don't mind the extra buck or two.
Posted by Ethan on 18th Nov 2013
This battery has been working great, have had it for a few months now and I have been running in the realm of .6 to .8 ohm builds.
Just one question - is it fake, or mislabeled?
The batteries I'd received from here are labeled 4000mah, yet the product description says 1500mah. As far as I know, 4k isn't possible on an 18650, and with all the fake batteries on the market today, I'm a bit skeptical.
Posted by Matt on 14th Nov 2013
If you are thinking about going into the sub ohm builds, this battery is perfect. This is the safest battery I have with my sub ohm builds. If you are getting this battery to last hour upon hour this is not the battery for you.
Posted by mitch on 28th Oct 2013
The battery on I've ever used. Lasts a solid about of time charges fast. Doesn't get hot. Recommend these for anyone wanting a "sub ohm" coil on a mech mod.
Posted by Jermania on 25th Oct 2013
After reading the rave reviews for this battery, I decided to try it. It is by no means a bad battery, it charges fine, and lasts a good while, but it is by no means extraordinary either. I have two 18650 mods, so I am comparing along side another battery I have had for a while, and this one is not nearly as consistently powerful, or last nearly as long. This battery was necessary to have due to the mod I was using requires a flat top, and it serves it's purpose.
Posted by Unknown on 11th Oct 2013
This battery is awesome.............................!
Posted by karine on 17th Jun 2013
Sorry for my english....
I've by its for DNA 20, it's the only batterie that i use now !
Posted by Tom Espen on 10th Jun 2013
Best performing battery I've ever had!
Compared to 18650 AW 2000/1600 mAh batteries, the MNKEs deliver so much more power. They are in a different league.
Posted by -JS on 8th Jun 2013
I bought 2 of these and they are both performing and charging very well! These MNKE's are a bit pricy in general, but for their specs (amp output capability), safety in being unprotected etc...they're well worth it!
Posted by Travis on 13th May 2013
Got two more for the upcoming delivery of a Caravela. What worries me is that they have one MNKE. I have one that is 1100MAH (bought some place else). Three that are 1500MAH from AV. And just the other day someone said that the real MNKE is 1400MAH that they bought direct. Not sure now but they work good. Thats why I bought 2 more.
I took one star off cause I am confused at the moment, but ready to be enlightened. Thank you.
Posted by Jim on 4th May 2013
If you want consistent hits every time, buy these. SLR at it's finest.
Posted by c00lkatz on 28th Mar 2013
This is a must with SLR coils. They work GREAT!
Posted by Unknown on 2nd Mar 2013
very good batteries. last longer than my AW under
low resistance and much safer to use for very low res'. do not get hot while vaping 0.8 ohms like i am used to.
Posted by Angus on 11th Feb 2013
If you use mechanical mods with low resistance kit like RBA's or cartos, USE THESE. The continuous output really is a confidence booster when out and about. They function flawlessly and charge quickly...I'm not saying that AW or Panasonic make a bad battery, but these are seriously the best I've tried.
Posted by osvis on 25th Jan 2013
So far, it is the best battery I've tried yet
Posted by Striker911 on 16th Jan 2013
I have tried some knockoffs and they are not the same. The Panny/Efest is a great battery but only safe to 10 watts. So this is a great way to vape up to 30 watts without worry of a battery venting situation. Sure you lose some life with only 1500MAH but Its well worth it and does not lose any power until its time to charge. No need for a KICK that also only goes up to 10 watts. No electronics needed. Its all in the way you set up your RBA. I have went as low as .5 ohms and the battery stays cool and consistent. Cant do that with any electronics. AV also has very good, common sense, customer service.
Posted by Pipes on 12th Jan 2013
Very impressed. Can push a 1.2 ohm load without much voltage drop and not get hot under continuous use of 10 minutes. Excellent for high current applications.
Posted by Ramon S. on 10th Jan 2013
...then this battery is for you! I picked up two of these for my AC9/Poldiac mod setup & with a 1.0 ohm coil these batteries hit hard. Will definitely be picking up more of these.
Posted by Joe P. on 10th Jan 2013
This battery is great. Keeps a constant voltage until ready for recharge. Doesn't fade off. You know those first few pulls you get from a freshly charged battery?? Then you seem to lose the intensity.. This doesn't happen with this battery. A must have for serious vapers with any type of variable voltage device. Buy with confidence.
Posted by ATX on 14th Dec 2012
Like low resistance coils or dual coils on your genesis? If so buy these. Even if not, still buy these. I was worried about the AW's due to their lower amp limit, not a concern with this battery. It might just be in my head but I feel like they hold their voltage better also. Keeps that "fresh batt vape" longer. If you're an AW IMR person, pick a few of these up. They are without a doubt worth your try.
Posted by Bishopheals on 10th Dec 2012
I am blown at the quality of these MNKE IMR 18650 Battery. I am able to run my Dual Highlander coils on GGTS Odysseus and Penelope with hardly needing a charge. Able to with stand .7 ohms dual coil. Love it and will recommend.
Posted by Jeremy on 27th Oct 2012
As of late, I haven't been happy with my aw imr's and was looking for an alternative to that battery. I'm not a technical vaper meaning I don't have a bunch of volt meters sitting around to test things out, but these batteries have a noticeable punch that my aw's seem to lack lately. And yes they are new aw's. With this battery I am satisfied to vape boge 2 ohm cartos without kicking it. This isn't so with my aw's anymore. I didn't have this problem with the 1600 mah aw's, just the 2000 mah batteries. Anyway, as far as perceived performance, this battery is really good. I would recommend this battery to anyone.
Choose a currency below to display product prices in the selected currency.