Nemisis Magnetic Switch
These magnets would replace the existing spring(s) in your Nemesis MOD ONLY, they are not designed for any other MOD. Easy to install, takes less than 5 minutes!
Be careful when disassembling the bottom switch, as there are 2 springs as well as a small pin that may be lost, and is required for operation, even with magnet upgrade. The kit comes with 2 N50 magnets. To install just unscrew the bottom button of your nemesis. Remove the set pin and the spring. Gently place one magnet down on the bottom button so it attracts to the bottom. Next place the other magnet down so that it is repelled by the first. Hold the magnets together and replace the set pin and the contact post. Screw down the contact post tightly so that it does not come loose. That is it.