Smoktech R-Tank Rebuildable Atomizer Tank
This is a fully rebuildable Tank system, with replaceable wick and coil.
New two piece design wit ha removeable atomizer chamber cap, the R-Tank does not require you to empty the liquid to access the the atomizer chamber
Down the center is a tube for air-flow that pulls air from the connector similar to a traditional cartomizer. The upper part of the tank has two spring loaded connection posts that serve as +/- connections and are installed with coil. Tank is made from polypropylene and holds approximately 4ml. These are threaded with a 510 connection for use on most EGo style batteries, and other devices with the 510 native connections. Bottom caps are all metal, top atomzier chamber cap is metal, and the mouthpiece is standard clear acrylic contoured. The setup comes with wick, and a 2ohm coil already installed. You can replace the wick, and heating coil very easily on these using NiChrome wire and wick. (Sold Separately) We carry prewound coils, or you can simply rebuild it yourself. The coil is attached with two spring loaded connection psots. This is an advanced user piece and will require a certain level of mechanical skills and knowledge to able to use and rebuild properly.
1x R-Tank w/ 2.0ohm coil installed (smoke colored tank)
1x 2.0ohm coil
1x 2.5ohm coil
1x 3.0ohm coil
1 instruction manual
1x gift box
To fill the tank:
Remove the top cap/mouthpiece, remove the silicone plug, slowly inject your favorite e-liquid till the tank is about 90% full, replace silicone cap.
To replace the coil and wick:
Wrap the tw oends fo your coil leds around the two sring loaded connection posts( between the connection post head and the washer. Insert the two wick ends through the two holes on the center plate, the wicks will go down to the liquid tank. Easy to fill with a syringe or needle bottle through the fill hole. Replacement pre-wound coils are available separately.