Sorry but this item is currently unavailable.
Please check back at a later stage.
Smoktech ViVi Rebuildable Atomizer Tank
This is a fully rebuildable Tank system, with wick and coil replacement.
Down the center is a tube for air-flow that pulls air from the connector similar to a traditional cartomizer. The upper part of the tank has two screw posts that serve as +/- connections and are installed with coil. Tank is made from polypropylene and holds approximately 4ml. These are threaded with a 510 connection for use on most EGo style batteries, and other devices with the 510 native connections. End caps are all metal, and the mouthpiece is designed after the popular Ming style. The setup comes with wick, and a 2ohm coil already installed. You can replace the wick, and heating coil very easily on these using NiChrome wire and wick. (Sold Separately) We carry prewound coils, or you can simply rebuild it yourself. The coil is attached with two small phillips head screws. This is an advanced user piece and will require a certain level of mechanical skills and knowledge to able to use and rebuild properly.
To fill the tank:
Remove the top cap/mouthpiece and insert a syringe through one of the wick holes. Slowly inject your favorite e-liquid till the tank is about 90% full.
To replace the coil and wick:
Unscrew the post screws using a small screw driver, insert the two wick ends through the two holes on the center dummy plate, the wick will go down to the liquid tank. Wrap the ends of the NiChrome around each screw post and tighten. Easy to fill with a syringe or needle bottle through the wick holes. Replacement pre-wound coils are available separately.
Posted by Adam Wilson on 9th Dec 2012
This is the absolute WORST Rebuild-able. The wicking sucks and it's cheaply made. Shame, Avid@
Posted by Evgeni on 7th Dec 2012
Good gadget for modding
Неплохой гаджет для моддинга
Posted by Unknown on 9th Sep 2012
I have no complaints about the taste or vapor, the issue is in the wicking system. It cant keep up with even normal, spaced out vaping. I ended up breaking it attempting to enlarge the wick holes in hopes liquid would more readily soak the coil.
Posted by Unknown on 27th Aug 2012
Its not a bad start if your looking for a cheep way to try the rebuild-able. Needs work but if your mechanically inclined give it a shot. lots of ways to mod this bugger.
Posted by Boogie on 20th Aug 2012
So I recently purchased a rebuildable atomizer / tank mod .......since only replaced coil but one time awesome vapor production it's a easy to do for beginner vapor NEWBIES YOU MUST TRY
Choose a currency below to display product prices in the selected currency.