ZMax Mini Variable Volt APV Rev 2 Stainless Steel
This is a variable volt Advanced Personal Vaporizer made by Smok Tech that takes vaping to the next level. This is actually a "variable power mod" because you have the option of adjusting either your output voltage or your power (watts). The Zmax adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments. The ZMax has a brushed Stainless finish and a maximum output of 4 Amps. The Rev. 2 the Zmax has one extra menu item (8) which enables you to switch between RMS and mean value voltage monitoring. The RMS mode is more accurate because it samples the output Voltage repeatedly while it is powering an atomizer or cartomizer. It is with these measurements that it is able to adjust for heat related Voltage drift.
The ZMax can read your output voltage, battery voltage and cartomizer/atomizer resistance. This Device does it all.
In addition, the ZMax has a native eGo style connector that allows you to use both 510 and eGo style cartomizers, atomizers and tanks without adapters. The eGo style connector does not have outside threads but typical eGo style parts fit flush down into the recess that is around the ZMax connector. 510 Tanks and other similar 510 items will screw in and be almost flush with the top.
The ZMax will accept Flat Top or Button Top IMR 18350 batteries with the standard end cap.
Never use non-rechargeable batteries in any device. Only use the recommended IMR high drain batteries for this device.
All adjustments and settings are made with the push button switch. This includes a setting to turn your ZMax off for safe travel in your pocket, bag or purse.
The ZMax includes an instruction manual in English.
Cartomizers, tanks, batteries or other accessories shown in the photos are not included. This is for the ZMax unit only.