Kayfun Fused Quartz Nano tank Kit

 This Stainless and fused quartz Kayfun tank kit will shorten your Kyafun by 10mm!!  Repalces the two stainless tank rings and Plastic tank rings on standard kayfun, Kayfun 3.1, Kayfun light. Kayfun Light + and most Kayfun clones that use M20 x 0.5 threaded tank sections.  With an upgraded Quartz glass tube there is no need to worry about liquids that may degrade the acrylic/PMMA/PC/M clear tanks. This kit will reduce the liquid capacty of your standard length KayFun. The Stainless glass sleeves will require a slower fill speed so the liquid does not backup through the fill port.

Includes:

2x brushed stainless threaded rings with orings (stainless sleeves are 22mm x 5.5mm)

1x Fused quartz tank (22mm Diameter x 13.5mm length)

1x stainless short chimney

Overall  size 22mm x 24.5mm (approximately 10mm shorter than standad kayfun tank sections)

KayFun is NOT included, this is for display purposes only.

Note on Glass: The glass tubes are made from Fused Quartz. The cut edges are flame polished to produce a clean look and relieve stress in the quartz tubes. Small chipping may show on the cut surfaces, this will not affect the function of the glass or the o ring seal. Please DO NOT remove the quartz glass from the stainless sleeves, removing or re-installing the glass incorrectly can crack or break the glass if not installed properly, excessive pressure applied, or without lube. There is a 24hr shipping damage claim only, no other warranty is available.