Loading... Please wait... 
Categories
Categories
Brands
Brands
- Home
- Adapters-Connectors
- Cisco 510 Connector V2
Cisco 510 Connector V2
$15.99
Product Description
Avid/Cisco 510 Connector
High temp/high amp 22mm 510 mod connector. Spring loaded copper center pin, Unique brass clamp/capture ring for secure non spinning connector assembly. Internal assembly is held in with a c clip, no internal threaded parts.
Made of 304 stainless, brass, Ultem1000, tellurium copper.
Features:
- 304 Stainless Connector body
- 22mm Diameter
- 2mm Deck thickness
- 11mm total connector height
- High Temp Ultem1000 Insulator
- Tellurium Copper spring loaded center post
- Spring is NOT part of circuit
- 2.5mm solder hole in center pin (can fit 12g wire/14g is optimal)
- Rated for 75Amp/400° continuous operation
- Brass Solder/Capture Ring
- 4 x 2.5mm Solder holes in capture ring
- 2 x M2.5 x 8mm Philips capture screws (Up to 4mm case thickness)
- 2 x M2.5 x 8mm Torx head screws (up to 4mm case thickness)
No internal nut to thread or tighten
No negative ring terminal required
No more "spinning " connectors
No internal threaded parts
Internal assembly held in with c clip
Easily replaceable
Link to PDF milling cutout dimensions HERE
DO NOT solder assembled!!! Solder center pin wire to center post prior to assembly. Negative should be soldered to any of the 4 available holes (2 of the six holes are threaded for screw capture) in the brass capture ring prior to installing in case.
Includes:
1x 22mm threaded connector body
1x Ultem Insulator cup
1x Copper floating center pin
1x SS wave spring
1x Ultem Insulator Washer
2x SS C clip
1x Brass Capture/solder ring
2x 2.5mm x 8mm SS Philips screws
2x 2.5mm x 8mm SS Torx screws
Designed in New York, USA by Cisco
Contact us directly for wholesale/modders pricing
